Got these for my 2026 Xpedition. Everything fit great except for the 2 front bolts under the wench (example picture 14 on the instruction page). Trail Armor provided 2 3/8 inch self tapping bolts, they were a bit to small to tap in the holes on the 2026 model. Easy fix i installed 2 1/2 inch bolts and nuts with flat washers. The 3/8 bolts that they provided would have worked if i would have had the nuts to screw on them. Great product and great customer service.
Trail Armor Polaris Xpedition XP 5 and ADV 5 Full Skids 2024 - 2025
Chadd Caperton
Trailing arm skid plates
Super easy install and contours perfectly to the trailing arms.
Skid plate precut mounting holes lined up very well to frame. I had to do some trimming on the front outer corners to clear my tubular rock sliders. Also trimmed a half inch to a taper on the left outer edge to relieve some interference to the left tubular rock slider. I replaced the front 5/16x 3” bolts to 5/16 x 3 1/4” bolts to ease installation. Also trimmed the leading and trailing edges to front and rear skid plates to a 45 degree taper to create a ramp should it contact any obstacle straight on. My modifications weren’t necessarily required if it wasn’t for my preexisting rock sliders. The taper to front and rear edges was just a personal touch to avoid shear effect should it make contact straight on a solid object. I have not had it on the trail yet for a test drive. However, I’m confident it will be a great improvement over the flimsy busted stick plates.
Trail Armor 2018 - 2019 Can Am Maverick Trail 800/1000, Maverick Trail DPS 800/1000, 2019 Maverick Sport, Maverick Sport DPS 1000, Maverick Sport DPS 1000R, Maverick Sport X XC, Maverick Sport X MR, Maverick Sport X RC Full Skids with Slider Nerfs
Got these for my 2026 Xpedition. Everything fit great except for the 2 front bolts under the wench (example picture 14 on the instruction page). Trail Armor provided 2 3/8 inch self tapping bolts, they were a bit to small to tap in the holes on the 2026 model. Easy fix i installed 2 1/2 inch bolts and nuts with flat washers. The 3/8 bolts that they provided would have worked if i would have had the nuts to screw on them. Great product and great customer service.
