Get the best in under vehicle protection with Trail Armor's full skid plate set for the 2019 - 2023 Honda Talon 1000 R and 1000 X and the 2021- 2023 Talon 1000 R and X Fox Live Valve Editions. Made from our own custom blend of ultra high molecular weight polymer, these 1/2" plastic skids are lighter than most traditional metal/aluminum skid plates (see specs below) and because they have no "impact memory", they absorb shocks to the bottom of your vehicle without the dents, galling and corrosion of metal/aluminum skids. Trail Armor was the first in the industry to design skids with the formed front leading edges featured on our skid plates. These leading edges protect vulnerable frame edges and wheel wells from blunt edge impacts and act as a starting edge to slide over obstacles without the resistance and drag of metal skid plates. Additionally, these Trail Armor skids for the Honda Talon 1000 are designed with extended side skid plates that help protect the vulnerable side panels of your vehicle. Compare Trail Armor's skid set coverage with other skid manufacturer's like items - side skid plates are either sold separately or the bottom skid coverage ends at the factory mounting holes for OEM skids, leaving this part of your vehicle completely unprotected. Trail Armor's skid plates come in easy to install panels that cover the full length and breadth of the vehicle, including the front and rear differential. Access holes to service points and oil drains make maintenance a breeze. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. However, if needed, individual panels may be removed to access different areas without removing the entire skid plate. Recessed mounting holes protect fasteners from damaging blows and keeping all bolt heads from protruding the skid's surface. All kits come with corrosion resistant hardware and photo-documented installation instructions. Installation videos, if available, are provided as a YouTube video on our site. Note: Any Trail Armor a-arm guards shown installed on vehicle in pictures are sold separately and are not included as part of this skid plate set. STANDARD SLIDERS WILL NOT WORK WITH FACTORY OEM ROCK SLIDERS! TRIMMED SLIDERS WILL WORK WITH OEM ROCK SLIDERS! Colors are not matched to any OEM graphic package.  They are considered a special order and thus non-returnable. SEE ALSO FITS CHART IN GALLERY FOR SPECIFIC YEAR AND MODEL FITMENT.

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits the 2019 - 2023 Honda Talon 1000X, 2020 - 2023 Honda Talon 1000X-4, 2023 Honda Talon 1000 XS and XS-4 (including Live Valve Editions) - front guards set of 2 only. Trailing Arm Guards sold separately.  Note:  Because of limited space, these front guards are not engraved with Trail Armor on the front. This picture is for illustration purposes only of the tri-color effect.    COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE.  THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME.  PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.  See ALSO FITS chart for specific year and model fitment. 

Trail Amor's Door Inserts for the 2020 - 2022 Honda Talon 1000X-4 and Talon 1000X-4 Fox Live Valve Edition are made from either a 1/4" polycarbonate with mar-resistant coating on both the interior and exterior OR 1/4" solid black plastic. The polycarbonate option allows a clear view to watch your wheel placement while rock crawling while keeping mud and debris from entering the cab!  If you need to close this gap but don't need a visual reference for technical rock crawling, the black option is a cost effective way to achieve this.  Includes mounting hardware and detailed photo-documented instructions.  Please see ALSO FITS chart in gallery for specific year and model fitment. 

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT!  Made of the same 1 /2" we make our skid plates out of, these rear trailing guards follow the contours of the vehicle's trailing arms offering unbeatable protection for your trailing arms. Guards mount easily. All mounting hardware and simple photo-documented installation instructions are included. Fits the 2019 - 2023 Honda Talon 1000 R, 2021 - 2022 Talon 1000 R Fox Live Valve Edition and 2023 Talon 1000 RS. Front Guards sold separately.  Note:  Because of limited space, these front guards are not engraved with Trail Armor on the front. This picture is for illustration purposes only of the tri-color effect.  Colors are considered a special order and are non-returnable. Tricolor is shown for illustration of the profile contrast only.  These guards are not engraved.   SEE ALSO FITS CHART IN GALLERY FOR SPECIFIC YEARS AND MODELS.

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT!  Made of the same 1 /2" we make our skid plates out of, these rear trailing guards follow the contours of the vehicle's trailing arms offering unbeatable protection for your trailing arms. Guards mount easily. All mounting hardware and simple photo-documented installation instructions are included. Fits the 2019 - 2023 Honda Talon 1000X, 2020 - 2023 Honda Talon 1000X-4, 2023 Honda Talon 1000 XS and XS-4 (including Live Valve Editions) - trailing arm guards set of 2 only. Front Guards sold separately.  Note:  Because of limited space, these front guards are not engraved with Trail Armor on the front. This picture is for illustration purposes only of the tri-color effect.   See ALSO FITS chart in gallery for specific year and model fitment. 

Get the best in under vehicle protection with Trail Armor's full skid plate set for the 2020 - 2023 Honda Talon 1000X-4 and Talon 1000X-4 Live Valve Edition. Made from our own custom blend of ultra high molecular weight polymer, these 1/2" plastic skids are lighter than most traditional metal/aluminum skid plates and because they have no "impact memory", they absorb shocks to the bottom of your vehicle without the dents, galling and corrosion of metal/aluminum skids. Trail Armor was the first in the industry to design skids with the formed front leading edges featured on our skid plates. These leading edges protect vulnerable frame edges and wheel wells from blunt edge impacts and act as a starting edge to slide over obstacles without the resistance and drag of metal skid plates. Standard Trail Armor skids for the Honda Talon 1000X-4 are designed with extended side skid plates that help protect the vulnerable side panels of your vehicle. Trimmed Trail Armor skids do not roll up the side of the vehicle so that you can use factory OEM rock sliders. See pictures in gallery. Compare Trail Armor's skid set coverage with other skid manufacturer's like items - side skid plates are either sold separately or the bottom skid coverage ends at the factory mounting holes for OEM skids, leaving this part of your vehicle completely unprotected. Trail Armor's skid plates come in easy to install panels that cover the full length and breadth of the vehicle, including the front and rear differential. Access holes to service points and oil drains make maintenance a breeze. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. However, if needed, individual panels may be removed to access different areas without removing the entire skid plate. Recessed mounting holes protect fasteners from damaging blows and keeping all bolt heads from protruding the skid's surface. All kits come with corrosion resistant hardware and photo-documented installation instructions. Installation videos, if available, are provided as a YouTube video on our site. Note: Any Trail Armor a-arm guards shown installed on vehicle in pictures are sold separately and are not included as part of this skid plate set. STANDARD SLIDERS WILL NOT WORK WITH FACTORY OEM ROCK SLIDERS! TRIMMED SLIDERS WILL WORK WITH OEM ROCK SLIDERS! Colors are not matched to any OEM graphic package.  They are considered a special order and thus non-returnable. Please see ALSO FITS chart in gallery for specific year and model fitment. 

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits the 2019 - 2023 Honda Talon 1000 R, 2021 - 2022 Talon 1000 R Fox Live Valve Edition and 2023 Talon 1000 RS. Trailing Arm Guards sold separately.  Note:  Because of limited space, these front guards are not engraved with Trail Armor on the front. This picture is for illustration purposes only of the tri-color effect.   COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE.  THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME.  PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS. SEE ALSO FITS CHART IN GALLERY FOR SPECIFIC YEAR AND MODEL FITMENT. 

Trail Amor's Door Inserts for the 2019 - 2021 Honda Talon 1000R/X and 2021 Talon R/X Fox Live Valve Edition are made from either a 1/4" polycarbonate with mar-resistant coating on both the interior and exterior OR 1/4" solid black plastic. The polycarbonate option allows a clear view to watch your wheel placement while rock crawling while keeping mud and debris from entering the cab!  If you need to close this gap but don't need a visual reference for technical rock crawling, the black option is a cost effective way to achieve this.  Includes mounting hardware and detailed photo-documented instructions.

• Extends the Honda Talon R, Talon X, Talon R Fox Live Valve, Talon X Fox Live Valve, Talon 1000 X-4, Talon 1000 X-4 Fox Live Valve fenders to protect you from mud splash.
• Greater coverage in the rear than other mud flaps on the market.
• Made of HDPE plastic (textured on face side) custom cut to work with the front and rear Honda Talon.
• Mounting hardware and instructions included. Drilling is required. 
• See ALSO FITS chart in gallery for specific year and model fitment. 
• COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE.  THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME.  PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS. 

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Trailing Arm Guards part number TA012IMPTAG-HT1000R for this model sold separately.  Note:  Because of limited space, these front guards are not engraved with Trail Armor on the front. This picture is for illustration purposes only of the tri-color effect.   COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE.  THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME.  PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.  See ALSO FITS chart for specific year and model fitment.