Trail Armor Can Am Maverick X3 Turbo, X3 X DS Turbo R, X3 X RS Turbo R, X3 X MR Turbo, X3 X RC Turbo, X3 X DS Turbo RR, X3 X MR Turbo RR, X3 X RS Turbo RR, X3 X RC Turbo RR, X3 DS Turbo, X3 X RC Turbo RR Full Skids with Integrated Slider Nerfs
TA012FULLSKID-CAMX3-SBK
Regular price
$1,125.00
Get the best in under vehicle protection with Trail Armor's full skid plate set for the 17 - 20 Can Am Maverick X3 Turbo, 17 - 21 X3 X DS Turbo R, X3 X RS Turbo R, 18 -21 X3 X MR Turbo, X3 X RC Turbo, 20 - 21 X3 X DS Turbo RR, X3 X MR Turbo RR, 20 -22 X3 X RS Turbo RR, X3 X RC Turbo RR, 21 X3 DS Turbo, 21 - 22 X3 X RS Turbo RR Smart Shox, 22 X3 X RC Turbo RR. Made from our own custom blend of ultra high molecular weight polymer, these 1/2" plastic skids are lighter than most traditional metal/aluminum skid plates and because they have no "impact memory", they absorb shocks to the bottom of your vehicle without the dents, galling and corrosion of metal/aluminum skids. Because our skid plates are made from the 1/2" material with unmatched impact strength, there is no need for any extra add ons to provide all you need to protect to the open areas of your X3. Trail Armor was the first in the industry to design skids with the formed leading edges (front and rear) featured on our skid plates. These leading edges protect vulnerable frame edges and wheel wells from blunt edge impacts and act as a starting edge to slide over obstacles without the resistance and drag of metal skid plates. Additionally,Trail Armor skids are designed with extended side panels bent to serve as slider nerfs which protect the vulnerable sides and rocker panels of your vehicle. Compare Trail Armor's skid set coverage with other skid manufacturer's like items - slider nerfs are either sold separately or the bottom skid coverage ends before the rocker panel, leaving this part of your vehicle unprotected. Trail Armor's skid plates come in easy to install panels that cover the full length and breadth of the vehicle, including the front and rear differential. Trail Armor skids for the X3 are formed to extend out and around the vulnerable belt housing while still allowing easy access for belt maintenance without removing the skids. Trail Armor's signature lap jointed panels create a continuous single smooth sliding surface - not stacked like other manufacturers skids with hard edges to create a catch point. Access holes to service points and oil drains make maintenance a breeze. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. However, if needed, individual panels may be removed to access different areas without removing the entire skid plate. Recessed mounting holes protect fasteners from damaging blows and keeping all bolt heads from protruding the skid's surface. All kits come with corrosion resistant hardware and photo-documented installation instructions. Installation videos, if available, are provided as a YouTube video on our site. Standard sliders roll up the sides as shown in the product picture. They act as a nerf bar protecting the sides of the rocker panels. Trimmed sliders extend past the bottom of the rocker panels about an inch but do not turn up the side. You can use OEM tubular nerf bars with trimmed sliders. PLEASE SEE ALSO FITS CHART IN GALLERY FOR SPECIFIC YEAR AND MODEL FITMENT.COLORS ARE CONSIDERED A SPECIAL ORDER. THEY CANNOT BE CANCELLED OR RETURNED ONCE ORDERED. IF YOU HAVE ANY QUESTIONS ABOUT COLORS AND YOUR GRAPHICS, PLEASE CONTACT US.
Trail Armor Can Am Maverick X3 Turbo, X3 Turbo R, X3 DS Turbo R, X3 Max DS Turbo R, X3 DS Turbo RR, X3 Max DS Turbo RR, X3 XRC Turbo RR, X3 DS Turbo, X3 Max DS Turbo, X3 XDS Turbo RR, X3 Max XDS Turbo RR, X3 XMR Turbo, X3 XRC Turbo iMpact Front Arm Guards
TA012ARMIMPFG-CAMX3-64-BK
Regular price
$190.00
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw front guards can take the iMPACT! Made of the same 1/2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Designed specifically for the 118 - 20 Can Am Maverick X3 Turbo, 17 - 19 X3 Turbo R, 2017 - 2021 X3 DS Turbo R, X3 Max DS Turbo R, 22 - 23 X3 DS Turbo RR, X3 Max DS Turbo RR, X3 X RC Turbo RR, 21 - 23 X3 DS Turbo, X3 Max DS Turbo, 20 - 23 X3 X DS Turbo RR, X3 Max X DS Turbo RR, 2022 - 2023 X3 Max DS Turbo RR, 18 - 21 X3 X MR Turbo, X3 X RC Turbo, 22 - 23 X3 X MR Turbo RR, X3 X RC Turbo RR, and 17 - 20 X3 Max Turbo these guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits the Can Am X3 64 " wide models - front guards set of 2 only. PLEASE SEE ALSO FITS CHART IN GALLERY FOR SPECIFIC MODELS! IF YOUR YEAR AND MODEL IS NOT ON THIS LIST, THEY WILL NOT FIT.COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE. THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME. PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.
Trail Armor Can Am Maverick X3, Maverick X3 X DS, Maverick X3 X RS, Maverick X3 Max, Maverick X RS, and Maverick Max X DS Mud Flap Fender Extensions
TAMFFE-CAMX3-BK
Regular price
$250.00
Extends the Can Am Maverick X3, Maverick X3 X DS, Maverick X3 X RS, Maverick X3 Max, Maverick X RS, and Maverick Max X DS OEM fender to protect you from mud splash. Greater coverage in the rear than other mud flaps on the market.
Made of HDPE plastic (textured on face side) custom cut to work with the X3 OEM fender. Extends out another 3 to 4".
Mounting hardware and instructions included.
Fits 2017 - 2023.
COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE. THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME. PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.
