Trail Armor RZR XP 1000, RZR4 XP 1000, and RZR XP Turbo EPS Mud Flap Fender Extensions
• Extends the RZR XP 1000, RZR4 XP 1000, and RZR XP Turbo EPS OEM-style fender flares to protect you from mud splash. Greater coverage in the rear than other mud flaps on the market.• Made of HDPE plastic (textured on face side) custom cut to work with the RZRXP1000 and RZR4XP1000 OEM-style fender flares.• Kits for 2015+ models have a scribed cut out for the breather tube on the driver's side rear mud flap fender extension. Will fit the 2015+ Highlifter. Has a scribed cut out for the Highlifter breather tube. • Mounting hardware and instructions included.• Please specify year models. Front flaps will not work on Rock Crawler Edition. NOW AVAILABLE IN COLORS!
Trail Armor RZR XP 1000, RZR XP Turbo and RZR XP Turbo S Full Skids with Slider Nerfs or Nerfs for Extreme Kick Out Steel Sliders
Get the best in under vehicle protection with Trail Armor's full skid plate set for the Polaris RZR XP 1000 (including the High Lifter and Rock Crawler Editions), RZR XP Turbo and RZR XP Turbo S. Made from 1/2" uhmw, these plastic skids absorb shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids (see weight comparison below). Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle, including the front and rear differential. Trail Armor's full skid plate set for the Polaris RZR XP 1000 provides additional rear coverage to protect your rear radius rods (not the trailing arms). For trailing arm and front a-arm protection, see product code TA012ARMIMPFG-RZR1000 and TA012ARMTAG-RZR1000 (shown in picture installed on machine, sold separately - WILL NOT FIT THE RZR XP TURBO S). Bumpers will mount to outside of skid plate with customer-provided longer bolts. NOW AVAILABLE IN RED, BLUE, ORANGE,YELLOW OR DUAL COLORS BLACK/WHITE/BLACK, BLUE/WHITE/BLUE, RED/WHITE/RED, BLACK/RED/BLACK. Standard Sliders Option - Includes Trail Armor's extended side panels that serve as nerf sliders to protect the bottom and sides of the rocker panels of your vehicle. Trimmed Sliders Option - Includes Trail Armor's sliders that protect the bottom of the rocker panels and works with the Pure Polaris Extreme Kick-out Steel Rock Sliders (sold separately).Please specify Option for sliders.Mounting hardware and instructions included. Ships UPS ground - no truck line needed! Enter code SHAREDSHIP for $20 off shipping. Lower 48 US retail customers only. Offers don't combine.You must specify year model as the 2016+ models have a different rear panel and spacer. Shipping weight Centers Skids 38 lbs Standard Sliders 30 lbs Trimmed Sliders 23 lbsFlat 4x8 sheet Aluminum 5052 piece weight, gauge .25: 111.744 lbsFlat 4x8 sheet UHMW piece weight, gauge .5: 79.2576 lbsSource: http://www.onlinemetals.com
Trail Armor Polaris RZR XP 1000, RZR4 XP 1000, RZR XP TURBO, RZR4 XP TURBO CoolFlo Windshield with Fast Clamps DoT Approved Rated AS4
Quick - what is the most common complaint about riding off-road in a side x side vehicle? I'll bet you said "the DUST". Install a windshield and roof and you actually compound the problem. In frustration, many have chosen to give up the protection of a windshield altogether rather than be plagued by the dust and heat. After extensive trail testing, Trail Armor has the answer - the CoolFlo Windshield (patent pending). This unique two-piece design delivers relief from back draft dust while providing superior face and eye protection. As an added benefit, it also helps by reducing cabin temperature. Looking to get street legal? Trail Armor's CoolFlow Windshields are DoT Approved/Rated and are engraved with the required markings. How are CoolFlo windshields different from other shields on the market? To answer this, let's look at what creates the problem. An open, roll-caged vehicle lets air flow freely while in motion. Put a windshield on the vehicle and the flow of air is changed - a low pressure zone is created behind the windshield. Ever ride in a jeep or convertible car and wonder why your hair blows forward toward the front or windshield? It is because of this low pressure. Automakers have addressed the issue by adding spoilers to roof racks and rear windows to create an air curtain. This works at highway speeds, but the problem still exists at lower trail speeds. It is this low pressure zone that draws the dust into the cab. By simply removing the lower section of the windshield, air is redirected by special foils downward to the floor and backward into the cab, effectively breaking the low pressure zone and forcing trapped engine heat out of the vehicle. The upper portion of the CoolFlo Windshield stays in place for much needed eye and face protection. What if it's too cold to ride without a full windshield? Leave the bottom part on and take it off later if you need to. Others have tried to fix the dust and heat problem by making half or three-quarter windshields. This only reduces the low-pressure zone; it does not break it. And half windshields do not provide adequate eye protection. So, with a half windshield you have no upper protection, only slightly less dust and the cool air is blown over your head without providing any relief. Trail Armor's CoolFlo Windshields, made of 1/4" mar-resistant, hard coated polycarbonate, provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly. Enter coupon code SHIPCOOLFLO for free shipping. Coupon codes cannot be combined. Retail customers only, lower 48 US. Fits RZR XP 1000, RZR4 XP 1000, RZR XP TURBO, RZR4 XP TURBO years 2014 - 2018.
Trail Armor RZR XP 1000 and RZR XP 4 1000 High Lifter/Desert/Rockcrawler Edition iMpact Front A-Arm Guards Set of 2
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required and are specially designed for the arched front a-arms of the Polaris High Lifter, Desert Edition and the Polaris Rock Crawler Edition RZR XP 1000s. All mounting hardware and simple photo-documented installation instructions are included. Fits the 2015 - 2018 RZR XP 1000 and RZR XP 4 1000 Polaris High Lifter, Desert Edition and Rock Crawler Edition - front guards set of 2 only. Rear Trailing Guards sold separately - part # TA012IMPTAG-RZR1000. NOTE: These a-arm guards fit the Polaris Highlifter a-arms that come factory on the Desert Edition and the Polaris Rock Crawler Edition. Will not fit aftermarket Highlifter a-arms. Now available in COLOR!