Trail Armor RZR 800, RZR 570, RZR 800 S, RZR XP 900, RZR 800 XC, RZR S 570 Door Debris Shields SLIMLINE
With Trail Armor’s half-door style debris shields and mud guards for the Polaris RZR, RZR 570, RZRS, RZR XP 900, RZR XC, RZR S 570 Door Debris Shields (see fitment below), you can enjoy Mother Nature, not wear her. They are made of a 5/8 solid high density UHMW plastic and requires NO DRILLLING of your rollcage. Door hanger and strike plates mount on existing factory holes and, unlike sheet metal door panels, our door panels will not rust, ding, or bend. Set features rotary paw slam latches and powdercoated hinges and strike plates. All exterior fasteners are weather resistant black zinc for a clean finish. Front doors open suicide for easy full extension entry/egress. The tight-fitting, slim-line profile allows for navigation in tight spots with nothing to hang on. Installs easily with photo-documented installation instructions. Lightweight and durable, these shields have the factory-like fit and finish that Trail Armor is known for. Please specify year and model when ordering. Graphics kits sold separately. Fitment: RZR 800 (fits through 2014) RZR 800 S (fits through 2014) RZR 570 (fits through 2020, year break between 2016 and 2017 - must specify correct year model!) RZRXP900 (through 2014) RZRXC (through 2014) RZR S 570 (2017).
Trail Armor Polaris RZR 800, RZR 800 S and RZR XC Center Skids
Get the best in under vehicle protection with Trail Armor's center skid plate set for the RZR 800, RZR 800 S and RZR XC. Made from 1/2" UHMW (a high density polymer), these plastic skids absorbs shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length of the vehicle with all hardware and instructions. Get complete coverage underneath with Trail Armor's RZR/RZRS nerf slider skids (shown in picture but sold separately). Fits through year model 2014. COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE. THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME. PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.
Trail Armor RZR 800, RZR 800 S, RZR XP 900, RZR 570 RZR 800 XC, RZR S 570 GenX Doors
Trail Armor is proud to introduce our new GenX doors for the Polaris RZR series. Trail Armor's GenX doors - when size matters! X-tra SPACE - Plenty of knee and elbow room and clearance for larger seats. X-tra ACCESS - Opens suicide for full extension entry/egress. X-tra TOUGH - 5/8 solid high density plastic will not rust or dent. X-tra STYLE - Graphics packages are available to complete your look. X-tra EASY - Installation requires NO DRILLING of your rollcage - door hanger and strike plates mount on existing factory holes.Fits year models RZR 800, RZR 800 S 2008 -2014, 2011- 2014 RZR XP 900 RZR 570 2012 - 2020, 2014 RZR 800 XC, 2017 RZR S 570. This product is designed and engineered to fit on stock cages, not guaranteed to work on aftermarket cages without modification.
Trail Armor's nerf sliders for the Polaris RZR 800, RZR 570, RZR 800 S, RZR 800 XC and RZR S 570 are made of high density 1/2" UHMW ( a high density plastic polymer). Because they are made of plastic, they are lighter than typical metal skids, and absorb the shock of impact - no dents and rust. This two piece set bolts up tight to the vehicle's bottom and does not hang down to get caught on obstacles. It protects from wheel well to wheel well, rolling up the sides to safeguard the plastic rocker panels. Strategically placed drain holes allow dirt and debris to wash out for drainage and easy cleaning. Mounts easily in factory pre-drilled holes. Nerfs can be installed with Trail Armor's center skids or with the OEM plastic skid (will have to cut off tank guard lip on OEM shield). Trail Armor's center skids sold separately. See product code TA012SKIDCENTER-RZR-S or TA012SKIDCENTER-RZR570. For those who want to maintain a 50" trail width on the standard RZR 800 or the RZRXC, please choose option below "Trimmed for 50" Max Trail Width or standard rocker panel protection please". STANDARD (untrimmed) rocker panels shown in pictures.Now available in color! SEE FITMENT SPECIFICS ON ALSO FIT CHART. COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE. THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME. PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.
Trail Armor's Tool Bags are made of water-repellent, UV-protected marine grade canvas and binding with tote handle. An inner plastic liner helps maintain shape and protects the bag's bottom. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. Bag straps come with adjustable buckle closures that are easily mounted to your vehicles' flat surfaces via provided footman loops or by screws/pop rivets. These bags can be slipped off mounting straps so you can take it where you need it. Size dimensions: 22 x 8x 6 large, 18 x 6 x 3 medium. Available in red or black.
Trail Armor Vehicle Tilt Over Stand
Install skid plates, axles and a-arms like a pro with Trail Armor’s new Tilt Over Stand! Modeled after the device we use daily in our shop, this tilt over stand will dramatically improve your maintenance and installation woes whenever you need access to your vehicle’s underbelly. Sturdy when in use, our tilt over stand collapses for storage.
Fall just got a little more fun with Windrock Park 2021 Vendorpalooza! Come out for the weekend to camp, hit the trails and shop with your favorite vendors!
PRE-ORDER NOW IF YOU WANT TRAIL ARMOR!
Oct 14 at 11 AM CDT – Oct 16 at 7 PM CDT Windrock Park