Buy Trail Armor iMpact A-Arm Guards for Polaris General 1000

Built to Take the Impact

Break bad on the trail and tackle the roughest terrain with confidence. Trail Armor iMPACT A-Arm Guards are engineered from ½” Super Tough polymer to deliver unmatched durability and suspension protection in aggressive riding conditions.

Designed for riders who demand serious protection without compromise.

3-Sided A-Arm Protection

Full front, rear, and bottom coverage
Shields vulnerable suspension components from rocks, ruts, and debris
Helps reduce costly trail damage
Designed for aggressive and technical terrain

Built Trail Armor Tough

Made from ½” Super Tough polymer
More impact-resistant than traditional metal guards
Lightweight, rust-proof, and corrosion-resistant
Proven material used in Trail Armor skid plates

Easy, No-Drill Installation

No drilling required
Mounting hardware included
Photo-documented installation instructions provided

Fitment

❌ Will NOT fit General XP 1000
➡️ See part number TA011ARMIMP-GENXP

📌 Refer to the ALSO FITS Chart in the gallery for exact year and model compatibility.

Important Information

Colors are special order
- Non-returnable
- Not matched to OEM color schemes
Contact us for guidance on color coordination with your graphics package

Ride Hard. Stay Protected.

Trail Armor iMPACT A-Arm Guards deliver rugged, trail-proven protection for riders who push their machines to the limit.

91%

(499)

(36)

(11)

(0)

539

Great fit, and easy to install.

Got these for my 2026 Xpedition. Everything fit great except for the 2 front bolts under the wench (example picture 14 on the instruction page). Trail Armor provided 2 3/8 inch self tapping bolts, they were a bit to small to tap in the holes on the 2026 model. Easy fix i installed 2 1/2 inch bolts and nuts with flat washers. The 3/8 bolts that they provided would have worked if i would have had the nuts to screw on them. Great product and great customer service.

Easy install

Easy install, great fit and much easier cleaning

Trailing arm skid plates

Super easy install and contours perfectly to the trailing arms.

Quality components and fit

Quality components and fit, looks great.

Trail Armor 1/2” Skid Plates 2019 Maverick Trail 1000 DPS

Skid plate precut mounting holes lined up very well to frame. I had to do some trimming on the front outer corners to clear my tubular rock sliders. Also trimmed a half inch to a taper on the left outer edge to relieve some interference to the left tubular rock slider. I replaced the front 5/16x 3” bolts to 5/16 x 3 1/4” bolts to ease installation. Also trimmed the leading and trailing edges to front and rear skid plates to a 45 degree taper to create a ramp should it contact any obstacle straight on. My modifications weren’t necessarily required if it wasn’t for my preexisting rock sliders. The taper to front and rear edges was just a personal touch to avoid shear effect should it make contact straight on a solid object. I have not had it on the trail yet for a test drive. However, I’m confident it will be a great improvement over the flimsy busted stick plates.