Trail Armor Polaris General 1000 Full Skids with Standard Slider Nerfs or Trimmed for Polaris Kick Out Steel Rock Sliders 2016-2019
Get the best in under vehicle protection with Trail Armor's full skid plate set for the 2016 - 2019 Polaris General 1000. Made from our own custom blend of ultra high molecular weight polymer, these 1/2" plastic skids are lighter than most traditional metal/aluminum skid plates (see specs below) and because they have no "impact memory", they absorb shocks to the bottom of your vehicle without the dents, galling and corrosion of metal/aluminum skids. Trail Armor was the first in the industry to design skids with the formed leading edges (front and rear) featured on our skid plates. These leading edges protect vulnerable frame edges and wheel wells from blunt edge impacts and act as a starting edge to slide over obstacles without the resistance and drag of metal skid plates. Additionally,Trail Armor skids are designed with extended side panels bent to serve as slider nerfs which protect the vulnerable sides and rocker panels of your vehicle. If you are running Polaris Extreme Kick Out Rock Sliders, choose the trimmed version of our sliders. Trimmed sliders extend approximately 1/2" past the bottom of the rocker panel so you still have complete under body protection. Compare Trail Armor's skid set coverage with other skid manufacturer's like items - slider nerfs are either sold separately or the bottom skid coverage ends before the rocker panel, leaving this part of your vehicle unprotected. Some competitors skids do not even cover the front differential area at all! Trail Armor's skid plates come in easy to install panels that cover the full length and breadth of the vehicle, including the front and rear differential. Lap jointed panels create a continuous single smooth sliding surface - not stacked like other manufacturers skids with hard edges to create a catch point. Access holes to service points and oil drains make maintenance a breeze. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. However, if needed, individual panels may be removed to access different areas without removing the entire skid plate. Recessed mounting holes protect fasteners from damaging blows and keeping all bolt heads from protruding the skid's surface. All kits come with corrosion resistant hardware and photo-documented installation instructions. Installation videos, if available, are provided as a YouTube video on our site. Also available in RED BLUE YELLOW and ORANGE! Weight - actual weight centers 32 lbs, sliders 45 lbs; dimensional weight per ups 101 lbs Flat 4x8 sheet Aluminum 5052 piece weight, gauge .25: 111.744 lbs Flat 4x8 sheet UHMW piece weight, gauge .5: 79.2576 lbs Source: http://www.onlinemetals.com.
Trail Armor 2014 - 2018 RZR XP 1000, RZR XP 4 1000, RZR XP Turbo EPS, RZR XP 4 Turbo Mud Flap Fender Extensions
Extends the 2014 - 2018 RZR XP 1000, RZR XP 4 1000, RZR XP Turbo EPS, RZR XP 4 Turbo OEM-style fender flares to protect you from mud splash. Greater coverage in the rear than other mud flaps on the market.
Made of HDPE plastic (textured on face sid) custom cut to work with the RZR XP 1000 and RZR 4 XP 1000 OEM-style fender flares.
Kits for 2015+ models have a scribed cut out for the breather tube on the driver's side rear mud flap fender extension. Will fit the 2015+ Highlifter. Has a scribed cut out for the Highlifter breather tube.
Mounting hardware and instructions included.
Please specify year models. FRONT FLAPS WILL NOT WORK WITH ROCK CRAWLER EDITION WITH HIGH VISIBILITY FRONT FENDER FLARES, WILL WORK ON HIGHLIFTER EDITION
WILL NOT FIT 2018 RZR XP Turbo S or any 2019 models. See TARZRMFFE1000-19
Trail Armor RZR 800 S and RZR 4 800 Mud Flap Fender Extensions for RZRS style Fender Flares
Extends the RZR 800 S OEM-style fender flares to protect you from mud splash. Greater coverage in the rear than other mud flaps on the market.
Made of HDPE plastic (textured on face side) custom cut to work with the RZRS OEM-style fender flares. Extends the widest point of the factory fender flare another 1 1/2". Overall width of vehicle with fender extensions is 61 1/2"
Mounting hardware and instructions included. Fits the RZR 800 S and RZR 4 800 (2008- 2014)
Note: You must have the RZR 800 S-style fender flares installed on your machine in order to mount these fender extensions on a RZR 800. They are not included as part of this kit.
Trail Armor 2015-2018 RZR S 900, RZR S 900 EPS, RZR 900 XC, RZR 4 900 EPS and 2016-2018 RZR S 1000 Mud Flap Fender Extensions
Extends the OEM fender flares on the RZR S 900 (2015 - 2018), RZR 900 XC (2015-2018), RZR S 900 EPS (2015-2018), RZR 4 900 EPS (2015 - 2018) and RZR S 1000 (2016-2018) to protect you and your vehicle from mud splash and tire spray. Greater coverage in the rear than other mud flaps on the market.Fender extensions follow body lines of vehicle to maintain Polaris's aggressive styling.Made of flexible HDPE plastic (textured on face side) custom CNC cut and formed to hold their shape, even in the harshest environments with extreme heat or cold. Will not fit the RZR 900 (50" model) without the RZR S 900-style fender flares. They are not included as part of this kit. Mounting hardware and instructions included.All Trail Armor products are proudly made in the USA. Now available on COLOR!
Trail Armor Ranger XP 900, Ranger Crew XP 900, Full Size Ranger XP 570, Ranger XP 1000, Ranger Crew XP 1000 Underbed Mud Shield with Fender Extensions
Tired of your tires caking mud in that impossible-to-clean honeycomb under your Polaris Ranger's dump bed and rear fender panels? Trail Armor's under bed mud shields with fender enclosures fit over those problem areas on the underside of your bed and in front of your tires to keep the mud out - and they feature front and rear fender extensions to keep the mud off your vehicle. Made from 1/8" thick plastic, these panels are custom cut to fit and will not interfere with dumping capability. Fender extends provide 4" of coverage from the vehicle body. Will fit Ranger XP 900 2013 - 2019 (including Highlifter edition), the 2014 - 2019 Ranger XP 900 Crew, 2017 Ranger XP 1000 (includes Highlifter SE and Northstar SE), 2017 - 2018 Ranger Crew XP 1000 and the 2014 - 2016 FULL SIZE Ranger XP 570. WILL NOT FIT THE 2016 and 2017 FULL SIZE RANGER 570 THAT HAS FRONT STRUTS OR THE 2019 RANGER CREW 1000 (NEW BODY STYLE). This kit has been modified in response to the most recent Polaris recall. If it is not already installed on your vehicle, you will need to install Part Name: SHIELD-BOX,CARGO Part #:5262966 to complete the coverage of the honeycomb on the passenger side bed.
Trail Armor Polaris Ranger XP 900 Crew and Ranger Crew XP 1000 Full Skids
Get the best in under vehicle protection with Trail Armor's full skid plate set for the 2014 - 2019 Polaris Ranger XP 900 Crew and the 2017- 2018 Ranger Crew XP 1000 (includes Highlifter and Northstar Special Edition). Made from 1/2" high density uhmw polymer, these plastic skids absorbs shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle, including the front and rear differential. Mounting hardware and instructions included. This is will NOT fit the 2019 Ranger Crew XP 1000 (that released in 2018, new body style). Picture shown below which is the latest Ranger XP 1000 Crew model that these skids will fit.