Trail Armor RZR 800, RZR 570, RZR 800 S, RZR XP 900, RZR 800 XC, RZR S 570 Door Debris Shields SLIMLINE
With Trail Armor’s half-door style debris shields and mud guards for the Polaris RZR, RZR 570, RZRS, RZR XP 900, RZR XC, RZR S 570 Door Debris Shields (see fitment below), you can enjoy Mother Nature, not wear her. They are made of a 5/8 solid high density UHMW plastic and requires NO DRILLLING of your rollcage. Door hanger and strike plates mount on existing factory holes and, unlike sheet metal door panels, our door panels will not rust, ding, or bend. Set features rotary paw slam latches and powdercoated hinges and strike plates. All exterior fasteners are weather resistant black zinc for a clean finish. Front doors open suicide for easy full extension entry/egress. The tight-fitting, slim-line profile allows for navigation in tight spots with nothing to hang on. Installs easily with photo-documented installation instructions. Lightweight and durable, these shields have the factory-like fit and finish that Trail Armor is known for. Please specify year and model when ordering. Graphics kits sold separately. Fitment: RZR 800 (fits through 2014) RZR 800 S (fits through 2014) RZR 570 (fits through 2020, year break between 2016 and 2017 - must specify correct year model!) RZRXP900 (through 2014) RZRXC (through 2014) RZR S 570 (2017).
Trail Armor RZR 800, RZR 800 S, RZR XP 900, RZR 570 RZR 800 XC, RZR S 570 GenX Doors
Trail Armor is proud to introduce our new GenX doors for the Polaris RZR series. Trail Armor's GenX doors - when size matters! X-tra SPACE - Plenty of knee and elbow room and clearance for larger seats. X-tra ACCESS - Opens suicide for full extension entry/egress. X-tra TOUGH - 5/8 solid high density plastic will not rust or dent. X-tra STYLE - Graphics packages are available to complete your look. X-tra EASY - Installation requires NO DRILLING of your rollcage - door hanger and strike plates mount on existing factory holes.Fits year models RZR 800, RZR 800 S 2008 -2014, 2011- 2014 RZR XP 900 RZR 570 2012 - 2020, 2014 RZR 800 XC, 2017 RZR S 570. This product is designed and engineered to fit on stock cages, not guaranteed to work on aftermarket cages without modification.
Trail Armor's nerf sliders for the Polaris RZR 800, RZR 570, RZR 800 S, RZR 800 XC and RZR S 570 are made of high density 1/2" UHMW ( a high density plastic polymer). Because they are made of plastic, they are lighter than typical metal skids, and absorb the shock of impact - no dents and rust. This two piece set bolts up tight to the vehicle's bottom and does not hang down to get caught on obstacles. It protects from wheel well to wheel well, rolling up the sides to safeguard the plastic rocker panels. Strategically placed drain holes allow dirt and debris to wash out for drainage and easy cleaning. Mounts easily in factory pre-drilled holes. Nerfs can be installed with Trail Armor's center skids or with the OEM plastic skid (will have to cut off tank guard lip on OEM shield). Trail Armor's center skids sold separately. See product code TA012SKIDCENTER-RZR-S or TA012SKIDCENTER-RZR570. For those who want to maintain a 50" trail width on the standard RZR 800 or the RZRXC, please choose option below "Trimmed for 50" Max Trail Width or standard rocker panel protection please". STANDARD (untrimmed) rocker panels shown in pictures.Now available in color! SEE FITMENT SPECIFICS ON ALSO FIT CHART. COLORS ARE CONSIDERED A SPECIAL ORDER AND ARE NON-RETURNABLE. THEY ARE NOT PIGMENT MATCHED TO ANY OEM MANUFACTURER'S COLOR SCHEME. PLEASE CONTACT US FOR ANY QUESTIONS ON MATCHING OR BLENDING WITH YOUR VEHICLE'S PLASTIC AND/OR GRAPHICS.
Trail Armor Polaris RZR 800, RZR S 800, RZR4 800, RZR XP 900, RZR4 XP 900, RZR 570, RZR S 570 CoolFlo Windshield with Fast Clamps
Quick - what is the most common complaint about riding off-road in a side x side vehicle? I'll bet you said "the DUST". Install a windshield and roof and you actually compound the problem. In frustration, many have chosen to give up the protection of a windshield altogether rather than be plagued by the dust and heat. After extensive trail testing, Trail Armor has the answer - the CoolFlo Windshield (patent pending). This unique two-piece design delivers relief from back draft dust while providing superior face and eye protection. As an added benefit, it also helps by reducing cabin temperature. Looking to get street legal? Trail Armor's CoolFlow Windshields are DoT Approved and Rated and are engraved with the required markings. How are CoolFlo windshields different from other shields on the market? To answer this, let's look at what creates the problem. An open, roll-caged vehicle lets air flow freely while in motion. Put a windshield on the vehicle and the flow of air is changed - a low pressure zone is created behind the windshield. Ever ride in a jeep or convertible car and wonder why your hair blows forward toward the front or windshield? It is because of this low pressure. Automakers have addressed the issue by adding spoilers to roof racks and rear windows to create an air curtain. This works at highway speeds, but the problem still exists at lower trail speeds. It is this low pressure zone that draws the dust into the cab. By simply removing the lower section of the windshield, air is redirected by special foils downward to the floor and backward into the cab, effectively breaking the low pressure zone and forcing trapped engine heat out of the vehicle. The upper portion of the CoolFlo Windshield stays in place for much needed eye and face protection. What if it's too cold to ride without a full windshield? Leave the bottom part on and take it off later if you need to. Others have tried to fix the dust and heat problem by making half or three-quarter windshields. This only reduces the low-pressure zone; it does not break it. And half windshields do not provide adequate eye protection. So, with a half windshield you have no upper protection, only slightly less dust and the cool air is blown over your head without providing any relief. Trail Armor's CoolFlo Windshields, made of 1/4" mar-resistant coated polycarbonate, provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly. Fits RZR 800 (08-14), RZR S 800 (09-14), RZR4 800 (10 - 14), RZR XP 900 (11-14), RZR4 XP 900 (12-14), RZR 570 (12-19), RZR S 570 (17).
Trail Armor Polaris RZR 570 and RZR S 570 Center Skids
Get the best in under vehicle protection with Trail Armor's center skid plate set for the Polaris RZR 570 (2012 - 2020) and 2017 RZR S 570 EPS. Made from 1/2" high density uhmw polymer, these plastic skids absorb shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle, including the front and rear differential. Integrated side skids slider nerfs help protect outer floor board and rocker panel edges (shown in picture, sold separately). These center skids will work with either Trail Armor's standard slider nerfs (has rolled up edge to protect rocker panels or the 50" version) Part # TA012SKIDNRF-RZR570 sold separately. Mounting hardware and instructions included. Now available in COLORS.
Trail Armor Polaris RZR, RZRS, RZR XP 900, RZR 570, RZR S 570 Bimini Soft Top
Trail Armor's Bimini Soft Top is made of water-repellent, UV-protected marine grade canvas and binding with 2 snap fasteners on front strap sand 2 quick-release snap closure buckles rear. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. This is a top quality product with a great, tight fit. Will work with or without a windshield. Easy on and off. Like all soft tops, it is recommended that you remove and stow this product before trailering your vehicle. Fits 2008 - 2017 RZR, RZRS, RZR XP 900, RZR S 570. Fits 2012-2020 RZR 570
Trail Armor RZR 800, RZR S 800, RZR 570 and RZR S 570 Rear Window Dust Shield Kit
Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your Polaris 2008 - 2014 RZR 800 and RZR 800 S, 2012 - 2019 RZR 570, and 2017 RZR S 570. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield kit has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. The bottom dust shield is made of ¼” black HMW haircell polyethylene and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the Polaris RZR 800, RZR S, RZR 570, and RZR S 570 is easy to install and comes with all mounting hardware and detailed, photo-documented instructions.
Trail Armor Tool Bag Large
Trail Armor's Tool Bags are made of water-repellent, UV-protected marine grade canvas and binding with tote handle. An inner plastic liner helps maintain shape and protects the bag's bottom. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. Bag straps come with adjustable buckle closures that are easily mounted to your vehicles' flat surfaces via provided footman loops or by screws/pop rivets. These bags can be slipped off mounting straps so you can take it where you need it. Size dimensions: 22 x 8x 6 large, 18 x 6 x 3 medium. Available in black.
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new ultra high density plastic a-arm guards can take the iMPACT! Made of the same 1/2" ultra high density plastic we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits Polaris RZR 570 beginning year 2012 - 2020. Now available in colors - BLUE, RED, YELLOW, and ORANGE (skid colors shown for illustration).
Trail Armor Tool Bag Medium
Trail Armor's Tool Bags are made of water-repellent, UV-protected marine grade canvas and binding with tote handle. An inner plastic liner helps maintain shape and protects the bag's bottom. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. Bag straps come with adjustable buckle closures that are easily mounted to your vehicles' flat surfaces via provided footman loops or by screws/pop rivets. These bags can be slipped off mounting straps so you can take it where you need it. Size dimensions: 22 x 8x 6 large, 18 x 6 x 3 medium. Available in red or black.
Trail Armor Vehicle Tilt Over Stand
Install skid plates, axles and a-arms like a pro with Trail Armor’s new Tilt Over Stand! Modeled after the device we use daily in our shop, this tilt over stand will dramatically improve your maintenance and installation woes whenever you need access to your vehicle’s underbelly. Sturdy when in use, our tilt over stand collapses for storage.