Get the best in under vehicle protection with Trail Armor's full skid plate set for the Polaris Ranger 800 Crew. Made from 1/2" high density uhmw polymer, these , including the front and rear differential. plastic skids absorb shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle. Extended side panels serve as nerf sliders protecting the sides and rocker panels of your vehicle. Mounting hardware and instructions included.Fits Year Models 2010 through 2014.
Trail Armor Polaris Ranger 800 Crew 2010+ Soft Top
Trail Armor's Soft Top is made of water-repellent, UV-protected marine grade canvas and binding with 2 snap fasteners on front strap sand 2 quick-release snap closure buckles rear. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. This is a top quality product with a great, tight fit. Will work with or without a windshield. Easy on and off. Like all soft tops, it is recommended that you remove and stow this product before trailering your vehicle.
Trail Armor RANGER iMpact A-Arm CV Front & Rear Boot Guards UHMW fits 2010+ 800 and Crew
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits 2010+ Ranger 800 and Ranger Crew. Will fit the 2012 - 2014 Ranger 900 Diesel.
Trail Armor Polaris Ranger 800, Ranger 800 Crew, Ranger 800 6x6, Ranger 500 and Ranger 570 Fullsize CoolFlo Windshield with Fast Clamps
Trail Armor’s revolutionary CoolFlo Windshield family continues to grow with the addition of this windshield for the Polaris Ranger 800 years 2009+, Ranger 500 years 09/10, Ranger 6x6 years 10+, Ranger 800 Crew years 10+ and 2016 Ranger 570 Fullsize Economy (has struts). Made of 1/4" mar-resistant coated (on the interior and exterior) polycarbonate, Trail Armor’s CoolFlo Windshield provides excellent face and eye protection while relieving back draft dust and heat for a comfortable ride. They are easy to install using Trail Armor's new Fast Clamps, and the lower section can be removed and replaced as needed. Trailers great with both panels in place. RETAIL CUSTOMERS LOWER 48 ONLY USE COUPON CODE SHIPCOOLFLO TO RECEIVE FREE SHIPPING
Whether you’re hunting, hauling, or just wanting to be prepared for anything, Trail Armor’s rear rack for the Polaris Ranger 700, 800 and 900 XP 1000XP is a must have. Made from heavy gauge metal, tubing and expanded mesh, this rear rack attaches to your Ranger’s bed by 4 camlocks providing tons of strap and tie down options. Future add-ons for this rear rack – lights, speaker bar, gun and tool racks, bed extender, color options, much more. Powdercoated for extra durability, easy on and off, collapsible for easy storage. Inside dimensions of basket 26 3/4" x 49 3/4".
Trail Armor Ranger 800, Ranger 800 Crew Ranger 570 Fullsize Economy (with struts) and Ranger 800 6x6 Rear Window Dust Shield Kit with Fast Clamps
Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your Ranger 800, 2010+ Ranger 800 Crew, 2016 Ranger 570 Fullsize Economy (with struts) and 2010+ Ranger 800 6x6. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield kit has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. The bottom dust shield is made of ¼” black HMW haircell polyethylene and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the Polaris Ranger is easy to install and features Trail Armor's new fast clamps for easy on and off. Kit comes with all mounting hardware and detailed, photo-documented instructions. Must specify year model, Year break between 2013 and 2014
Trail Armor RANGER 800, 800 Crew and 900 Diesel A-Arm CV Front & Rear Boot Guards in Black
Defend your front and rear CV boots from rocks, sticks and roots on three sides - the front, rear and bottom with Trail Armor's A-Arm Guards for the 2010 - 2014 Ranger 800 and 800 Crew. Guard bottoms feature large, strategically placed drainage holes to allow mud, rocks and debris to pass through minimizing build up. Built to last of heavy gauge metal (steel) and powder coated for extra durability, guards mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Will also fit the 2012 - 2014 Ranger 900 Diesel.
Trail Armor Polaris Ranger 800 700 Under Bed Mud Shield
Tired of your tires caking mud in that impossible-to-clean honeycomb under your Polaris Ranger 800's dump bed? Trail Armor's under bed mud shields fit over those problem areas on the underside of your bed above the tires to keep the mud out. Made from 1/4" thick plastic, these panels are custom cut to fit on your bed underside (above the tires) and will not interfere with dumping capability. Will fit 2009 700, 2010 800, 800 Crew and up.
Whether you’re hunting, hauling, or just wanting to be prepared for anything, Trail Armor’s small rear rack for the full size Polaris Ranger 500, 700, 800, 800 Crew, 900, 900 Crew, and 6x6 is a one you don't want to leave home without. A more compact version of our popular Ranger Rear Basket Storage Rack (TAREARRACK-PR), this rear rack attaches to your Ranger’s bed with four camlocks providing tons of strap and tie down options for all your guns, tools, totes, coolers, decoys, buckets, storage boxes - you name it. Rack is made from heavy gauge metal with a 12" deep x 56" wide expanded mesh bottom and powdercoated for extra durability, this rack is easy on and off and may be placed at any position on the bed sides front to rear. Trail Armor's Rotopax mount (TAROTOMNT-PR) and Rotopax storage tanks ( sold separately, see link Bags, Pouches, Storage, Gun Racks).
Trail Armor Polaris Ranger 2010+ 800, Crew A-Arm CV Front and Rear Boot Guards in Aluminum
Defend your front and rear CV boots from rocks, sticks and roots on three sides - the front, rear and bottom - with Trail Armor's A-Arm Guard. Guard bottoms feature large, strategically placed drainage holes to allow mud, rocks and debris to pass through minimizing build up. Built to last of mill aluminum, guards mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included.Will fit the 2012 - 2014 Ranger 900 Diesel SHOWN IN POWDERCOATED STEEL FOR ILLUSTRATIVE PURPOSES ONLY. ALUMINUM IS NOT POWDERCOATED.
Trail Armor Ranger RotopaX Mount Fits all years Ranger 700, 800, 400, 500, 570, EV, 800 Midsize, 570 Midsize, 500 Crew Midsize, 800 Crew, 6x6, 900, 900 Crew
Trail Armor's new mount for the Ranger is the only true all-in-one kit you need. These mounts can be used in a variety of configurations and locations - 1.75 gallon packs, 3 gallon packs, 4 gallon packs, singles, doubles, with a rack, without a rack, on the bed side rails, on the bed front - the options are limitless. Kit comes with 1 mount, 2 camlocks, and 1 rotary lock mount. If you are going to mount double packs, you will need 2 rotary lock pack mounts. RotopaX tanks and storage packs sold separately under Style Category "Bags, Pouches, Storage, Gun Racks".
Trail Armor's Tool Bags are made of water-repellent, UV-protected marine grade canvas and binding with tote handle. An inner plastic liner helps maintain shape and protects the bag's bottom. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. Bag straps come with adjustable buckle closures that are easily mounted to your vehicles' flat surfaces via provided footman loops or by screws/pop rivets. These bags can be slipped off mounting straps so you can take it where you need it. Size dimensions: 22 x 8x 6 large, 18 x 6 x 3 medium. Available in red or black.
Trail Armor Vehicle Tilt Over Stand
Install skid plates, axles and a-arms like a pro with Trail Armor’s new Tilt Over Stand! Modeled after the device we use daily in our shop, this tilt over stand will dramatically improve your maintenance and installation woes whenever you need access to your vehicle’s underbelly. Sturdy when in use, our tilt over stand collapses for storage.