Trail Armor Ranger Mount for RotopaX Fits all years Ranger 700, 800, 400, 500, 570 Fullsize, EV, 800 Midsize, 570 Midsize, 500 Crew Midsize, 800 Crew, 6x6, 900, 900 Crew, Ranger XP 1000, General, General 4, General XP and General XP 4 through 2022
Trail Armor's mount for the Ranger and General is the only true all-in-one kit you need. These mounts can be used in a variety of configurations and locations - 1.75 gallon packs, 3 gallon packs, 4 gallon packs, singles, doubles, with a rack, without a rack, on the bed side rails, on the bed front - the options are limitless. Kit comes with 1 Trail Armor mount, 2 camlocks, and 1 Rotopax Standard Pack Mount. If you are going to mount double packs, you will need 2 Rotopax Standard Pack Mounts.
Trail Armor Ranger 800, Ranger 800 Crew and Ranger 900 Diesel iMpact A-Arm CV Front & Rear Boot Guards
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits 2010 - 2014 Ranger XP 800, Ranger HD 800 EPS and Ranger 800 Crew. Will fit the 2012 - 2014 Ranger 900 Diesel. Fits the fullsize Ranger 800, not the midsize Ranger 800.
Trail Armor Polaris Ranger XP 800 Full Skids 2010-2014
Get the best in under vehicle protection with Trail Armor's full skid plate set for the Polaris Ranger 800 2010 - 2014. Made from 1/2" high density uhmw polymer, these plastic skids absorbs shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle, including the front and rear differential. Mounting hardware and instructions included. Note: These skids fit years 2010 -2014.
Trail Armor Ranger 800, Ranger 800 Crew, Ranger 570 Fullsize Economy (with struts), Range 570-6 Fullsize Economy Crew (with struts), Ranger 900 Diesel, Ranger 900 Diesel Crew and Ranger 800 6x6 Rear Window Dust Shield Kit with Fast Clamps
Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your Ranger 800, Ranger 800 Crew, Ranger 570 Fullsize Economy (with struts), Range 570-6 Fullsize Economy Crew (with struts), Ranger 900 Diesel, Ranger 900 Diesel Crew and Ranger 800 6x6. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield kit has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. The bottom dust shield is made of ¼” black HMW haircell polyethylene and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the Polaris Ranger is easy to install and features Trail Armor's new fast clamps for easy on and off. Kit comes with all mounting hardware and detailed, photo-documented instructions. Must specify year model, Year break between 2013 and 2014. SEE ALSO FITS CHART FOR SPECIFIC VEHICLE FITMENTS.WILL NOT FIT ANY EXTRUDED CAGE
Trail Armor’s revolutionary CoolFlo Windshield family continues to grow with the addition of this windshield for the 2009 - 2010 500, 2009 700, 2010 - 2014 800, 2010 - 2014 800 Crew, 2010 - 2017 Ranger 800 6x6, 2016 - 2018 Ranger 570 Fullsize Economy (with struts). Made of 1/4" mar-resistant coated (on the interior and exterior) polycarbonate, Trail Armor’s CoolFlo Windshield provides excellent face and eye protection while relieving back draft dust and heat for a comfortable ride. They are easy to install using Trail Armor's new Fast Clamps, and the lower section can be removed and replaced as needed. Trailers great with both panels in place. WILL NOT FIT ANY EXTRUDED CAGE.
Trail Armor Polaris 500, 570 fullsize, 700, 800, 800 Crew, 900, 900 Crew, 6x6, (all through 2019) Ranger XP 1000 (all through 2021), 2019 Ranger XP 1000 Crew Small Rear Basket Storage Rack
Whether you’re hunting, hauling, or just wanting to be prepared for anything, Trail Armor’s small rear rack for the full size Polaris 500, 570 fullsize, 700, 800, 800 Crew, 900, 900 Crew, 6x6, (all through 2019) Ranger XP 1000 (all through 2021) and 2019 Ranger XP 1000 Crew is a one you don't want to leave home without. A more compact version of our popular Ranger Rear Basket Storage Rack (TAREARRACK-PR), this rear rack attaches to your Ranger’s bed with four camlocks providing tons of strap and tie down options for all your guns, tools, totes, coolers, decoys, buckets, storage boxes - you name it. Rack is made from heavy gauge metal with a 12" deep x 56" wide expanded mesh bottom and powdercoated for extra durability, this rack is easy on and off and may be placed at any position on the bed sides front to rear. Trail Armor's Rotopax mount (TAROTOMNT-PR) and Rotopax storage tanks ( sold separately, see link Bags, Pouches, Storage, Gun Racks).
Ever parked on a hill and can't get your 09+ 800 Ranger or 09/10 500 (big chassis, not midsize) out of park? This complete parking brake kit allows you to switch the brake lock on, apply pressure to the brake pedal and shift in and out of park on an incline without damaging your transmission. Comes with brake lock, switch, wiring harness, mounting hardware and instructions Formed brake line on the Ranger 800 is longer than shown in picture (RZR kit shown) Easy install
Trail Armor Polaris 700 and 800 Ranger Winch Mount
Trail Armor's custom built winch mount for the 2009 Polaris Ranger 700 and 800 (except Crew) is Made of heavy gauge steel and powder coated black for extra durability Mounts to pre-drilled factory holes with provided hardware Accepts 4-bolt WARN/Ramsey-style winches up to 4000 lbs Kit includes stand-off for roller fair lead and mounting hardware. Please choose which roller fairlead you need - 4000 lb or 3000 lb or less as the fairlead hole size is different