Trail Armor Polaris Ranger Midsize 400 500 EV 800 570 Fast Clamp CoolFlo Windshield
Trail Armor’s revolutionary CoolFlo Windshield family continues to grow with the addition of this windshield for the Polaris Ranger Midsize 400, 500, EV, 800 and 570. Made of 1/4" mar-resistant coated (on the interior and exterior) polycarbonate, Trail Armor’s CoolFlo Windshield provides excellent face and eye protection while relieving back draft dust and heat for a comfortable ride. They are easy to install with Trail Armor's Fast Clamps, and the lower section can be removed and replaced as needed. Trailers great with both panels in place. Securely mounts for added rigidity while towing and on the trail. USE COUPON CODE SHIPCOOLFLO for free shipping on this item. Retail customers lower 48 US only please. Fits 2010 - 2013 Ranger 500 Midsize, Ranger 400 Midsize, Ranger Midsize 500 Crew, Ranger EV, Ranger Midsize 800, Ranger Midsize 570, Ranger Midsize 570 Crew.
Get the best in under vehicle protection with Trail Armor's full skid plate set for the Polaris Ranger Midsize 2010+ 400, 2011+ 500, 2010 - 2014 Electric Vehicle (EV) and 2013 - 2014 Ranger 800 Midsize. Made from 1/2" high density uhmw polymer, these plastic skids absorb shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. They come in easy to install jointed sections that cover the full length and breadth of the vehicle, including the front and rear differential. Integrated side skids help protect outer floor board and rocker panel edges. Mounting hardware and instructions included.
Trail Armor's Soft Top is made of water-repellent, UV-protected marine grade canvas and binding with 2 snap fasteners on front strap sand 2 quick-release snap closure buckles rear. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. This is a top quality product with a great, tight fit. Will work with or without a windshield. Easy on and off. Like all soft tops, it is recommended that you remove and stow this product before trailering your vehicle.Fits Ranger MIDSIZE: 2010-2014 400, 2011 500, 2010- 2014 EV, 2013 - 2014 800, 2014 570
Ever parked on a hill and can't get your Polaris Ranger Midsize 2010+ 400, 2011+ 500, 2010+ EV out of park? This complete parking brake kit allows you to switch the brake lock on, apply pressure to the brake pedal and shift in and out of park on an incline without damaging your transmission.Comes with brake lock, switch, wiring harness, mounting hardware and instructions. Formed brake line on the Ranger Compact slightly smaller than shown in picture (RZR kit shown). Easy install
Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your Polaris Ranger Midsize 400, 500, 800, 570, EV, 570 Crew and 500 Crew. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate with UV protectant (to prevent yellowing), making it the strongest and most durable rear window on the market. Instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s rear window overlays the roll cage bars for a professional, tight fit – essential when used as part of a full cab enclosure for those winter rides. The bottom dust shield is made of ¼” black plastic and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor quick clamps make installation or removal of this kit easy. Comes with all mounting hardware and detailed, photo-documented color instructions.Fits:2010 - 2014 Ranger Midsize 4002011 - 2013 Ranger Midsize 5002010 - 2013 Ranger EV2012 - 2014 Ranger Midsize 8002014 Ranger Midsize 5702014 Ranger Midsize 570 Crew2011 - 2013 Ranger Midsize 500 Crew
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits RANGER Midsize iMpact 2010+ 400, 2011 - 2013 500 and 500 Crew, and 800.
Trail Armor's custom built overhead stereo mount for the Polaris Ranger 700 05/08, 09 Ranger Crew, 2010+ Midsize 400, 05/11 Ranger 500, Midsize 500, Midsize 500 Crew, Midsize 800, 2010+ EV is made to work with Stereo Console Part # TT-RMT2900 (sold separately). It will also work with the Cooter Brown overhead stereo units. Made of 16 gauge metal and powder coated black for extra durability. Two mounts fit on front and rear overhead roll cage bars for easy access. Mounting hardware and instructions included.
Trail Armor Ranger RotopaX Mount Fits all years Ranger 700, 800, 400, 500, 570 Fullsize, EV, 800 Midsize, 570 Midsize, 500 Crew Midsize, 800 Crew, 6x6, 900, 900 Crew
Trail Armor's new mount for the Ranger is the only true all-in-one kit you need. These mounts can be used in a variety of configurations and locations - 1.75 gallon packs, 3 gallon packs, 4 gallon packs, singles, doubles, with a rack, without a rack, on the bed side rails, on the bed front - the options are limitless. Kit comes with 1 mount, 2 camlocks, and 1 rotary lock mount. If you are going to mount double packs, you will need 2 rotary lock pack mounts. RotopaX tanks and storage packs sold separately under "Bags, Pouches, Storage, Gun Racks".
Trail Armor's Tool Bags are made of water-repellent, UV-protected marine grade canvas and binding with tote handle. An inner plastic liner helps maintain shape and protects the bag's bottom. It is sewn with marine-quality UV-protected thread. Trail Armor's logo is embroidered on the rear left of the top. Bag straps come with adjustable buckle closures that are easily mounted to your vehicles' flat surfaces via provided footman loops or by screws/pop rivets. These bags can be slipped off mounting straps so you can take it where you need it. Size dimensions: 22 x 8x 6 large, 18 x 6 x 3 medium. Available in red or black.
Trail Armor Vehicle Tilt Over Stand
Install skid plates, axles and a-arms like a pro with Trail Armor’s new Tilt Over Stand! Modeled after the device we use daily in our shop, this tilt over stand will dramatically improve your maintenance and installation woes whenever you need access to your vehicle’s underbelly. Sturdy when in use, our tilt over stand collapses for storage.
Trail Armor Polaris Ranger Midsize 400, 500, 500 Crew, 570, 800, ETX and EV Small Rear Basket Storage Rack
Whether you’re hunting, hauling, or just wanting to be prepared for anything, Trail Armor’s small rear rack for the midsize Polaris Ranger 400, 500, 500 Crew, 570, 570 Crew, 800, ETX and EV is a one you don't want to leave home without. This compact rear rack attaches to your Ranger’s bed with four camlocks (included), providing tons of strap and tie down options for all your guns, tools, totes, coolers, decoys, buckets, storage boxes - you name it. Rack is made from heavy gauge metal with a 12" deep x 50" wide expanded mesh bottom and powdercoated for extra durability, this rack is easy on and off and may be placed at any position on the bed sides front to rear. Trail Armor's Rotopax mount (TAROTOMNT-PR) and Rotopax storage tanks ( sold separately, see link Bags, Pouches, Storage, Gun Racks).
Trail Armor Polaris Ranger Midsize 2010+ 400, 2011 500, 2010+ EV Winch Mount
Trail Armor's custom built winch mount for the Ranger Midsize 400 500 EV is made of heavy gauge steel and powder coated black for extra durability Mounts to pre-drilled factory holes with provided hardware. Accepts 4-bolt WARN/Ramsey-style winches up to 4000 lbs.
Trail Armor Ranger Compact Midsize 400, 500, 500 Crew and EV A-Arm CV Front and Rear Boot Guards in Aluminum
Defend your front and rear CV boots from rocks, sticks and roots on three sides - the front, rear and bottom - with Trail Armor's A-Arm Guards. Guard bottoms feature large, strategically placed drainage holes to allow mud, rocks and debris to pass through minimizing build up. Built to last of mill finish aluminum, guards mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Some pictures shown in black powder coated steel for illustrative purposes only. Fits Ranger Compact Midsize 400, 500, 500 Crew and EV Years 2010 - 2012.