1/4" Female Inverted Flare x 1/8" Male NPT Brass Straight Connector - bag of 50.  Includes flat rate usps shipping within US. 

Product Attributes
Connection Type A x B Female Inverted Flare x Male NPT
Material Brass
Size A 1/4"
Size B 1/8"
Type Straight Connector
Weighted Average Lead Content 0% - 4.5%
Product Weight 0.1215 

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Armor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits the Polaris 2014 - 2019 RZR XP 1000, RZR XP 4 1000, 2016 - 2019 RZR XP Turbo, RZR XP 4 Turbo EPS - front guards set of 2 only. Trailing Arm Guards sold separately. NOTE: 64" vehicle

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Trail Armor's hard top roof for the Polaris RZR XP 1000, RZR S 900, RZR S 900 EPS, RZR 900, RZR 900 EPS TRAIL, RZR 900 XC, RZR S 1000 and RZR XP Turbo gives you the hard wearing protection you need from the elements. Roof extends to roll cage lines and features contoured edges and a stylish rear spoiler - no drips on the shoulders or down the back! Made of .200 (1/4") high density polyethylene and mounts with the Polaris OEM hard plastic visor (not included, should be stock with this vehicle). Ships ups ground - no oversized package charges! As with all Trail Armor products, this hard top roof is proudly made in the USA.Fits: 2014 - 2019 Polaris RZR XP 1000, 2015 - 2019 RZR S 900, RZR S 900 EPS, RZR 900, RZR 900 EPS TRAIL and RZR 900 XC, 2016 - 2019 RZR S 1000 2016 - 2019 RZR XP Turbo

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your 2014 - 2017 Arctic Cat Wildcat Trail. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. Strategically placed bulb seal limits vibration and rattling on the trail. Rear window does not interfere with bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the Arctic Cat Wildcat Trail is easy to install and features Trail Armor's new fast clamps for easy on and off. Kit comes with all mounting hardware and detailed, photo-documented instructions.

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Get the best in under vehicle protection with Trail Armor's full skid plate set for the Yamaha Wolverine X2. Made from our own custom blend of ultra high molecular weight polymer, these 1/2" plastic skids are lighter than most traditional metal/aluminum skid plates (see specs below) and because they have no "impact memory", they absorb shocks to the bottom of your vehicle without the dents, galling and corrosion of metal/aluminum skids. Trail Armor was the first in the industry to design skids with the formed leading edges (front and rear) featured on our skid plates. These leading edges protect vulnerable frame edges and wheel wells from blunt edge impacts and act as a starting edge to slide over obstacles without the resistance and drag of metal skid plates. Additionally, these skids for the Wolverine X2 are designed side panels that extend approximately a 1/2" past the rocker panels to protect the vulnerable sides and rocker panels of your vehicle. Compare Trail Armor's skid set coverage with other skid manufacturer's like items - slider nerfs are either sold separately or the bottom skid coverage ends before the rocker panel, leaving this part of your vehicle unprotected. Trail Armor's skid plates come in easy to install panels that cover the full length and breadth of the vehicle, including the front and rear differential. Access holes to service points and oil drains make maintenance a breeze. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. However, if needed, individual panels may be removed to access different areas without removing the entire skid plate. Recessed mounting holes protect fasteners from damaging blows and keeping all bolt heads from protruding the skid's surface. All kits come with corrosion resistant hardware and photo-documented installation instructions. Installation videos, if available, are provided as a YouTube video on our site. A-Arm guards if shown installed in pictures are not included and sold separately.

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Quick - what is the most common complaint about riding off-road in a side x side vehicle? I'll bet you said "the DUST". Install a windshield and roof and you actually compound the problem. In frustration, many have chosen to give up the protection of a windshield altogether rather than be plagued by the dust and heat. After extensive trail testing, Trail Armor has the answer - the CoolFlo Windshield (patent pending). This unique two-piece design delivers relief from back draft dust while providing superior face and eye protection. As an added benefit, it also helps by reducing cabin temperature. Looking to get street legal? Trail Armor's CoolFlow Windshields are DoT Approved/Rated and are engraved with the required markings. How are CoolFlo windshields different from other shields on the market? To answer this, let's look at what creates the problem. An open, roll-caged vehicle lets air flow freely while in motion. Put a windshield on the vehicle and the flow of air is changed - a low pressure zone is created behind the windshield. Ever ride in a jeep or convertible car and wonder why your hair blows forward toward the front or windshield? It is because of this low pressure. Automakers have addressed the issue by adding spoilers to roof racks and rear windows to create an air curtain. This works at highway speeds, but the problem still exists at lower trail speeds. It is this low pressure zone that draws the dust into the cab. By simply removing the lower section of the windshield, air is redirected by special foils downward to the floor and backward into the cab, effectively breaking the low pressure zone and forcing trapped engine heat out of the vehicle. The upper portion of the CoolFlo Windshield stays in place for much needed eye and face protection. What if it's too cold to ride without a full windshield? Leave the bottom part on and take it off later if you need to. Others have tried to fix the dust and heat problem by making half or three-quarter windshields. This only reduces the low-pressure zone; it does not break it. And half windshields do not provide adequate eye protection. So, with a half windshield you have no upper protection, only slightly less dust and the cool air is blown over your head without providing any relief. Trail Armor's CoolFlo Windshields, made of 1/4" mar-resistant, hard coated polycarbonate, provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly.  Fits RZR XP 1000, RZR4 XP 1000, RZR XP TURBO, RZR4 XP TURBO years 2014 - 2018.

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your Polaris RZR S 900, RZR S 900 EPS, RZR 900, RZR 900 EPS TRAIL and RZR 900 XC. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield kit has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. The bottom dust shield is made of ¼” black HMW haircell polyethylene and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function and will accommodates most 4 and 5 point harness straps. Will not work with Polaris 6 point retractable harness. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the 2015-19 Polaris RZR S 900, RZR S 900 EPS, RZR 900, RZR 900 EPS TRAIL, RZR 900 XC and the 2016-19 RZR S 1000 is easy to install and features Trail Armor's new fast clamps. Kit comes with all mounting hardware and detailed, photo-documented instructions.

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Trail Armor’s Rear Window Dust Shield kit provides the most effective barrier for keeping cargo, dust and debris out of the cab of your 2010 - 2014 RZR 4 800. The upper rear windshield is made from ¼” thick (not 3/16” or 1/8”) clear polycarbonate, making it the strongest and most durable rear window on the market. Unlike some of the other rear windows on the market, Trail Armor’s Rear Window Dust Shield kit has a UV protective coating on the exterior of the window to inhibit yellowing. Additionally, instead of just fitting between the roll cage bars (leaving sizable gaps between the shield and the bars), Trail Armor’s Rear Window Dust Shield kit overlays the roll cage bars for a professional, tight fit as a cab back – essential when used as part of a full cab enclosure for those winter rides - and will not interfere with hard or soft tops. The bottom dust shield is made of ¼” black HMW haircell polyethylene and fits securely between the lower cage and the bed of your vehicle. It will not interfere with any bed function. Like all Trail Armor windshields, skids and debris shields, this Rear Window Dust Shield kit is cut with a CNC 5-axis router to ensure a smooth-edged, accurately cut product every time. Trail Armor’s Rear Window Dust Shield Kit for the Polaris RZR 4 800 is easy to install and comes with all mounting hardware and detailed, photo-documented instructions.

THIS IS A SECOND AND COULD HAVE MINOR SCRATCHES AND/OR OTHER COSMETIC FLAWS.  BECAUSE OF THE DEEP DISCOUNT, NO OTHER DISCOUNTS WILL BE APPLIED AND THE PRODUCT IS NOT RETURNABLE FOR ANY REASON. PICTURES WILL BE PROVIDED UPON REQUEST. 

Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits 2017 RZR S 570.

• Extends the RZRXP900 and RZR4XP900 OEM fender flares to protect you from mud splash.
• Greater coverage in the rear than other mud flaps on the market.• Made of HDPE plastic (textured on face side) custom cut to work with the RZRXP900 and RZR4XP900 OEM fender flares.
• Mounting hardware and instructions included.
• Fits years 2011-2014.
• Will fit the Jagged X Edition vehicle.

• Trail Armor's custom built front bumper / pre-runner light bar for the Polaris Ranger RzR, RZRS and RZR4 is made of heavy duty 1" tubing and powder coated black for extra durability.
• Features an integrated skid plate mount which also protects your lower A-frame mounts
• Light guards help protect your headlights without interfering with the beam
• Mounts to vehicle frame instead of radiator support to avoid impact damage to radiator
• Easily accepts factory winch mounts or Trail Armor winch mount
• Two welded light tabs accept up to 7 inch round slim line lights
• Mounting hardware and instructions included