Install skid plates, axles and a-arms like a pro with Trail Armor’s new Tilt Over Stand! Modeled after the device we use daily in our shop, this tilt over stand will dramatically improve your maintenance and installation woes whenever you need access to your vehicle’s underbelly. Sturdy when in use, our tilt over stand collapses for storage.
Trail Armor Kawasaki Teryx 4, Teryx 4 S, Teryx, and Teryx S Full Skids with Slider Nerfs
Get the best in under vehicle protection with Trail Armor's full skid plate set with slider nerfs for the Kawasaki Teryx 4 750 (2012- 2013), Teryx 4 800 (2014 - 2022), Teryx 4 S (2021 - 2022),Teryx 800 (2014 - 2022), and Teryx S (2021 - 2022). Made from a 1/2" high density uhmw polymer, these plastic skids absorb shock to the bottom of the vehicle with no dents or rust and are lighter than traditional metal skids. Strategically placed drain holes allow dirt and debris to wash out - you don't have to remove them to clean out the belly your vehicle. Unlike other aftermarket skids, Trail Armor's skid set features a covered oil drain access panel so there is no large hole in the skid plate to create a catch point and, worse, expose your vulnerable engine housing to rocks, sticks and other debris. They come in easy to install jointed sections that cover the full length and breadth of the vehicle including the front and rear differential. Extended side panels serve as nerf sliders protecting the sides and rocker panels of your vehicle. Mounting hardware and instructions included. No special tools required for installation. See ALSO FITS chart in the gallery for specific year and model fitment!
Trail Armor Kawasaki TERYX4 LE, TERYX4 Camo, TERYX4 and TERYX, TERYX LE, TERYX Camo iMpact A-Arm Guards
Break bad on the trail, ride the most buggy-busting terrain you can find - Trail Amor's new uhmw a-arm guards can take the iMPACT! Made of the same 1 /2" UHMW we make our skid plates out of, these are by far the toughest, best designed and coolest a-arms on the market. Guards have three sided protection of your front and rear CV boots - front, rear and bottom - and mount easily with no drilling required. All mounting hardware and simple photo-documented installation instructions are included. Fits Kawasaki 2012 - 2020 TERYX4 all models and 2014 - 2020 TERYX all models.
Trail Armor Kawasaki 2012 - 2020 TERYX4 LE, TERYX4 Camo, TERYX4, 2014 - 2020 TERYX, TERYX LE, TERYX Camo CoolFlo Windshield with Fast Clamps
Quick - what is the most common complaint about riding off-road in a side x side vehicle? I'll bet you said "the DUST". Install a windshield and roof and you actually compound the problem. In frustration, many have chosen to give up the protection of a windshield altogether rather than be plagued by the dust and heat. After extensive trail testing, Trail Armor has the answer - the CoolFlo Windshield (patent pending). This unique two-piece design delivers relief from back draft dust while providing superior face and eye protection. As an added benefit, it also helps by reducing cabin temperature. Looking to get street legal? Trail Armor's CoolFlow Windshields are DoT Approved, rated AS4 and engraved with the required markings. How are CoolFlo windshields different from other shields on the market? To answer this, let's look at what creates the problem. An open, roll-caged vehicle lets air flow freely while in motion. Put a windshield on the vehicle and the flow of air is changed - a low pressure zone is created behind the windshield. Ever ride in a jeep or convertible car and wonder why your hair blows forward toward the front or windshield? It is because of this low pressure. Automakers have addressed the issue by adding spoilers to roof racks and rear windows to create an air curtain. This works at highway speeds, but the problem still exists at lower trail speeds. It is this low pressure zone that draws the dust into the cab. By simply removing the lower section of the windshield, air is redirected by special foils downward to the floor and backward into the cab, effectively breaking the low pressure zone and forcing trapped engine heat out of the vehicle. The upper portion of the CoolFlo Windshield stays in place for much needed eye and face protection. What if it's too cold to ride without a full windshield? Leave the bottom part on and take it off later if you need to. Others have tried to fix the dust and heat problem by making half or three-quarter windshields. This only reduces the low-pressure zone; it does not break it. And half windshields do not provide adequate eye protection. So, with a half windshield you have no upper protection, only slightly less dust and the cool air is blown over your head without providing any relief. Trail Armor's CoolFlo Windshields, made of 1/4" mar-resistant coated polycarbonate (coating on both sides), provide excellent face and eye protection and relieves the dust and heat for a comfortable ride. They are easy to install, and the lower section can be removed and replaced on the fly. MUST SPECIFY YEAR MODEL - YEAR BREAK BETWEEN 2015 - 2016.